Original price was: R15,499.00.R13,910.00Current price is: R13,910.00.
Purpose-built for the marine environment, the Signature Series marine amplifiers feature some of the most impressive environmental protection available — delivering a Signature performance out on the water.
 |
 |
 |
 |
 |
 |
| Class-D amplifier design delivers higher efficiency and greater output. | Connect up to two speakers per channel at 2 ohms, or bridge two channels at 4 ohms for increased power. | Conformal coated PCBs provide extra protection from the marine elements. | Rigid aluminium alloy heat sink is moulded for greater dissipation of heat. | The amplifiers are available in monoblock, 4-channel, 5-channel, 6-channel and 8-channel configurations. | Engineered to last season after season, the amplifiers include a supported 3-year warranty. |
DESIGNED AND ENGINEERED TO TRUE-MARINE™ STANDARDSBuilt on the True-Marine design philosophy from Fusion®, the Signature Series amplifiers have been tested to a high level of protection against salt fog, temperature, vibration and UV. |
CLASS-D AMPLIFIER TECHNOLOGYThe highly efficient Class-D design provides lower battery drain with a higher output than Class-AB amplifiers. This delivers increased power to the connected speakers/subwoofers for a whole new level of audio performance. |
SUPERIOR SYSTEM PERFORMANCEThe Signature Series amplifiers feature built-in variable bass boost, a subsonic filter and variable low/high pass crossover filters for superior performance and enhanced system protection. |
 |
 |
 |
MARINE-READY DESIGN WITH CONFORMAL COATED PCBSHelping to extend the life of your amplifiers, the Signature Series amplifiers are designed with conformal coated PCBs to provide extra protection from the marine elements. |
RIGID ALUMINUM ALLOY HEAT SINKFor increased efficiency, the rigid aluminium alloy heat sink is moulded to form a singular die-cast chassis. The fin layout is calculated with precision to increase the surface area of the heat sink and improve heat dissipation. |
STAINLESS-STEEL MIRROR FINISHThe polished stainless-steel control panel cover conceals and helps protect all cable connections and settings controls while providing an attractive finish to complement any installation. |
 |
 |
 |
2,250-WATT MONOBLOCK AMPLIFIERThe Signature Series 2,250-watt monoblock amplifier is specifically designed to power a subwoofer. The amplifier is configurable for 1-ohm impedance for extra power. |
1,400-WATT 4-CHANNEL AMPLIFIERThe Signature Series 1,400-watt 4-channel amplifier can power up to a maximum of four pairs of speakers or two pairs of speakers and one subwoofer. |
1,600-WATT 5-CHANNEL AMPLIFIERThe Signature Series 1,600-watt 5-channel amplifier can power up to a maximum of four pairs of speakers and one subwoofer. |
 |
 |
|
1,500-WATT 6-CHANNEL AMPLIFIERThe Signature Series 1,500-watt 6-channel amplifier can power up to a maximum of six pairs of speakers or four pairs of speakers and one subwoofer. |
2,000-WATT 8-CHANNEL AMPLIFIERThe Signature Series 2,000-watt 8-channel amplifier can power up to a maximum of eight pairs of speakers or four pairs of speakers and two subwoofers. |
General |
|
| Channels | Monoblock/4/5/6/8 |
| Physical dimensions (Height) | 210 mm (8.27″) |
| Physical dimensions (Width) | Monoblock/4/5-Channel: 300 mm (11.81″) 6/8-Channel: 420 mm (16.54″) |
| Physical dimensions (Depth) | Monoblock/4/5-Channel: 50 mm (1.97″) 6/8-Channel: 57 mm (2.24″) |
| Weight | Monoblock: 3.8 kg (8.38 lbs) 4-Channel: 3.53 kg (7.77 lbs) 5-Channel: 3.6 kg (7.94 lbs) 6-Channel/6-Channel (24 V): 5.3 kg (11.68 lbs) 8-Channel: 5.6 kg (12.35 lbs) |
| Operating temperature range | 0° to 50° C (32° to 122° F) |
| Warranty | 3 years |
| Operating voltage | Monoblock/4/5/6/8-Channel: 10.8-16 VDC 6-Channel (24 V): 21.6-32 VDC |
Audio |
|
| Amplifier class | Class D |
| Rated continuous (RMS) power (14.4 V input @ 4 Ohm < 1% THD) | Monoblock: 500 W x 1 4-Channel: 150 W x 4 5-Channel: Main: 80 W x 4/Sub: 250 W x 1 6-Channel: 100 W x 6 8-Channel: 100 W x 8 |
| Rated continuous (RMS) power (14.4 V input @ 2 Ohm < 1% THD) | Monoblock: 850 W x 1 4-Channel: 220 W x 4 5-Channel: Main: 130 W x 4/Sub: 330 W x 1 6-Channel: 140 W x 6 8-Channel: 140 W x 8 |
| Rated continuous (RMS) power (28.8 V input @ 4 Ohm < 1% THD) | 6-Channel (24 V): 100 W x 6 |
| Rated continuous (RMS) power (28.8 V input @ 2 Ohm < 1% THD) | 6-Channel (24 V): 140 W x 6 |
| Frequency response (+0, -1dB) | Monoblock: 10 Hz-320 Hz (-3 dB, dB @ 4 Ohm rated power) – subwoofer only 4/5-Channel: 10 Hz-50 kHz (-3 dB, dB @ 4 Ohm rated power) 6/8-Channel and 24-Volt 6-Channel: 10 Hz-40 kHz (-3 dB, dB @ 4 Ohm rated power) |
| Input sensitivity @ RCA inputs | 0.3 V-8 V RMS (user adjustable) |
| Input voltage range @ RCA inputs | 0.3 V-8 V RMS (user adjustable) |
| Input impedance | Monoblock/5-Channel: 4 kΩ nominal 4/6/8-Channel and 24-Volt 6-Channel: 7 kΩ nominal |
| Current consumption (StandBy) | Monoblock/4/5/6/8-Channel: < 1 mA @ 14.4 V input 6-Channel (24 V): < 1 mA @ 28.8 V input |
| Current consumption (Idle) | Monoblock/4/5/6/8-Channel: < 2.5 A @ 14.4 V input 6-Channel (24 V): < 1.25 A @ 28.8 V input |
| Current consumption (Max) | Monoblock: 120 A 4/5-Channel: 80 A 6-Channel: 75 A 8-Channel: 100 A 6-Channel (24 V): 35 A |
| Fuse rating | Monoblock/6-Channel: 3 x 40 A ATC blade-type (SAE J1171 compliant) 4/5-Channel: 2 x 40 A ATC blade-type (SAE J1171 compliant) 8-Channel: 4 x 40 A ATC blade-type (SAE J1171 compliant) 6-Channel (24 V): 3 x 20 A ATC blade-type (SAE J1171 compliant) |
| Min. copper power/Ground wire gauge | 1 |
Signal Processing |
|
| High-pass/low-pass full range filter | Yes (user selectable) |
| HP variable crossover frequency range | Monoblock: 10 Hz-80 Hz 4/5/6/8-Channel and 24-Volt 6-Channel: 32 Hz-320 Hz |
| LP variable crossover frequency range | Monoblock: 32 Hz-320 Hz 4/5/6/8-Channel and 24-Volt 6-Channel: 32 Hz-320 Hz |
| Bass boost | 0 dB-9 dB, user adjustable (zone 3 only) |
